Editing Endoscope reprocessing (section)

== Technique ==

* Before cleaning
** Immediately wipe the insertion tube with a disposable cloth
** Aspirate detergent through suction and biopsy channels
** Depress and release air/water button several times
** Flush air/water channel (manufacturer instructions)
** Flush auxiliary water channel (foot pump)
** Disconnect from processor
* Leak testing
** The process of placing all the channels under air pressure to identify any leaks
** Remove all valves and buttons first
** Attach leak tester and immerse in water
* Manual cleaning
** Fill sink to cover scope and add detergent
** Brush buttons, soak, rinse
** Brush all channels using a long brush
** Brush valve and button seats
** Brush control head - all grooves and recesses
** Brush distal tip
** Brush light guide plug
** Wipe all surfaces
** Secure cleaning attachments to endoscope channels
** All accessory channels flushed again
** Empty sink and rinse
* Place scope in AFER (Automatic Flexible Endoscope Reprocessor) and run cycle
* Endoscope storage
** Dry all channels with pressurised air
** Remove the cleaning adapters
** Dry exterior surfaces
** Check for sheath/lens damage
** Place endoscope up into a cabinet to dry

[[Category:Endoscopy]]